Infrared saunas in Makassar for houses on 5,500 VA

How an infrared cabin actually heats you

In a timber sauna the heater warms the air and the air warms you. Infrared skips that step: the panels send radiant heat straight into skin and muscle, so 45-60 degrees in the cabin is enough. Parents who find 90 degrees hard going, and anyone who prefers a 30-45 minute session to a short hot one, tend to choose it for exactly that reason.

• Footprint from 1x1 m up to 1.3x1.05 m, built for one or two people.
• Full-spectrum or carbon panels lining the back, the side walls and the underside of the bench.
• Digital control with a built-in timer, plus lighting and an optional audio hookup.
• A glass front, so the cabin does not feel like a box in a small bedroom or on a landing.

It is also the quietest thing we install - no stones, no water, no ventilation shaft to run - which matters when the only free corner in a three-storey house happens to be on the top floor.

Infrared or dry sauna: which one for a house here?

Both have a place here, and in practice the meter decides more often than personal taste does. Where the supply allows 6 kW and there is room to spare, a dry sauna at 80 degrees followed by a cold plunge gives the bigger contrast and the more social room. Where the house sits on 5,500 VA, or the only spare space is a 1.2 m alcove, an infrared cabin gets you a usable session with no PLN upgrade and no structural work at all.

Humidity plays out the same way for either choice: at 45-60 degrees the cabin stays dry inside and the surrounding room stays comfortable, which is exactly why we install these in bedrooms and dressing rooms across Hertasning, Panakkukang and Tamalanrea. Plenty of clients end up with both eventually - the infrared cabin for weekday evenings, the timber sauna kept for the weekend.

Why 1.7-2.4 kW is the number that matters here

An infrared cabin draws 1.7-2.4 kW, about what a domestic water heater pulls. On a 5,500 VA connection it sits alongside ordinary household load without complaint, and even a 2,200 VA house can usually take it with a small upgrade rather than the full jump to 7,700 VA. That one fact explains why this product exists in this city at all - PLN upgrades on older streets around Daya, Sudiang and Sungguminasa are slow and billed to the owner.

That does not mean we cut corners on the wiring. A dedicated breaker, an ELCB, and cable rated for continuous load, because a 40-minute session at full draw asks more of a circuit than boiling a kettle ever would. Panels are fixed so nobody can lean on them, and the controller sits well clear of a wet hand.

A day or two on site, then the warranty starts

Delivery and assembly take one to two days, wiring and a first test session with you present included. There is no fabrication window to wait through, since we hold finished cabins in Panakkukang - the only real constraint is your own schedule, not a shipping manifest. The structure carries a two-year warranty, and the panels keep their factory cover on top of that.

Weighing this against a timber cabin? Read the dry sauna page, then check the figures on the price page. Households chasing the hot-cold contrast usually end up pairing the infrared cabin with an ice bath, which needs no supply upgrade of its own either.

What it costs

Figures are indicative in rupiah, with fitting anywhere in Makassar, Gowa or Maros already folded in.